| SPST: Single Pole Single Throw |
 |
The SPST (Single Pole Single Throw) switch is used to switch a microwave signal from a common input to either of the two outputs. The characteristic impedance is 50 Ohms.
|
| |
| Specification: |
| Switch Type: |
Electromechanical, Coaxial |
| RF Contacts: |
Break Before Make |
| Actuator: |
Latching, Failsafe, 12/15/24/28 VDC |
| Switching Time: |
20ms(max.) |
| Connectors: |
RF Pins out |
| Temperature Range: |
-25 o C to +65 o C |
| Humidity: |
Moisture Seal Available |
| Shock: |
MIL-STD-202 Method 213, Condition D (500G Non Operating) |
| Vibration: |
MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) |
| Operating Life: |
1 Million Cycles(min.) |
| MTBF: |
Over 1 Million Hours (MIL-HDBK-217F Fixed, 25 o C, <1 cycle per hour) |
| RF Power: |
Power Handling Chart |
| Part Number: |
Model Numbering System |
| Datasheet: |
SPST |
| Full Catalog: |
Switch2009 |
| | | |
|
|
